Configuration Software

Somfy Digital Network™ (SDN) Motor Configuration Software 5.1

This tool should be used to discover and configure all current versions of SDN motors using the latest motor communication protocol. This software will only be used for Somfy Digital Network Stand-alone systems.

Somfy Digital Network™ (SDN) Keypad Configuration Software 5.7

This tool should be used configure all current versions of SDN DecoFlex™ Digital Keypads using the latest motor and keypad communication protocol. This software will only be used for Somfy Digital Network Stand-alone systems.

Somfy Digital Network™ (SDN) Address Converter

This tool will assist integrators in identifying the correct format required and converting between the readable and inverted address formats within the Somfy Digital Network™(SDN).

RS485 Motor Limit Setting & Address Reader Tool
Version: 5151114_A11

An intuitive tool for installers to set and adjust motor end limits, roll directions and speed before or during installation on site.
(Part Number: 9017142)

SDN Configuration Tool
Version: 1.2.4.2

The all-inclusive tool for RS485 systems. The SDN Configuration Tool is a single tool that controls a full façade or building via easy access on site. This intuitive tool makes commissioning much easier, from configuration to diagnostics.
Requires: USB to RS485 Converter (Part Number: 9015260)

animeo® IP Visual Configuration

animeo® IP unified commissioning and management software. Version #1.0.3.181

animeo® IP Firmware

Firmware for animeo® IP Building Controller and Sub-Building Controller. Version #1.0.6.659

Setup Somfy Animeo IB+ 2.2.10

4AC Moco Configuration Software

4DC Moco Configuration Software

PoE Motors Configuration Software

Configure Sonesse PoE motors to allow direct integration using Power over Ethernet (PoE) technology.

PoE Gateway Configuration Software

Configure the PoE Gateway to integrate SDN motors with Power over Ethernet (PoE) networks. Easily set up communication between motors, keypads, and systems.

Somfy Connect™ Field Server Toolbox

Discover and perform network configuration with the Somfy Connect™ BMS Interface.

BACnet® Discovery Tool

Discover what a Somfy Connect BMS is broadcasting on a BACnet/IP network.

Somfy Connect™ BMS Interface Firmware

Firmware for Somfy Connect™ BMS Interface products to maintain the latest firmware version.
Build Revision: 7.0.0
Build Date: 2024-10-04 08:01:11 +0000
Bios Version: 4.1.2

Somfy Connect™ 1.6

Configure the Somfy Connect LTI to RTS or SDN Motors allowing integration with Lutron® Lighting Systems. This software should be used on Somfy Connect™ LTI units with version 6-9 on the product label.

SDN String Calculator

Generate command strings for speaking to SDN systems via a third party automation system.

Control4 Drivers

Control Somfy radio or digital motors from Control4. RTS motors programmed into one or several Somfy myLinks(up to 16 channels each) or Somfy SDN RS485 motors connected to Somfy PoE Gateways or UAI Plus. Included are interface drivers(for myLink, UAI Plus and PoE Gateway) and one driver for motors and/or motor groups.

Somfy Connect™ 1.5

Configure the Somfy Connect LTI to RTS or SDN Motors allowing integration with Lutron® Lighting Systems. This software should be used on Somfy Connect™ LTI units with "V5" on the product label.

Somfy Connect™ 1.4

Configure the Somfy Connect LTI to RTS or SDN Motors allowing integration with Lutron® Lighting Systems. This software should be used on Somfy Connect&trade LTI units with "V4" on the product label.

MoCoILT3 Tester

Motor Configuration Software 3.5.6

This tool is used to configure legacy intelligent motors for Stand-alone SDN systems.

Somfy Switch 4.2

This tool is used to configure legacy intelligent keypads for Stand-alone SDN systems.